#####################################################################
##
##  Fichero:
##    lab7.xdc  12/09/2023
##
##    (c) J.M. Mendias
##    Diseño Automático de Sistemas
##    Facultad de Informática. Universidad Complutense de Madrid
##
##  Propósito:
##    Configuración del laboratorio 8
##
##  Notas de diseño:
##
#####################################################################

#
# Voltaje del interfaz de configuración de la FPGA
#
set_property CFGBVS VCCO [current_design];
set_property CONFIG_VOLTAGE 3.3 [current_design];

#
# Reloj del sistema: 100 MHz
#
set_property -dict { PACKAGE_PIN W5 IOSTANDARD LVCMOS33 } [get_ports clk];
create_clock -name sysClk -period 10.0 -waveform {0 5} [get_ports clk];

#
# Pines conectados a los pulsadores
#
set_property -dict { PACKAGE_PIN T18 IOSTANDARD LVCMOS33 } [get_ports rst];    # btnU

#
# Pines conectados al USB HID (PS/2)
#
set_property -dict { PACKAGE_PIN C17 IOSTANDARD LVCMOS33 PULLUP true } [get_ports ps2Clk];
set_property -dict { PACKAGE_PIN B17 IOSTANDARD LVCMOS33 PULLUP true } [get_ports ps2Data];

#
# Pines conectados a la VGA
#
set_property -dict { PACKAGE_PIN P19 IOSTANDARD LVCMOS33 } [get_ports hSync];
set_property -dict { PACKAGE_PIN R19 IOSTANDARD LVCMOS33 } [get_ports vSync];
set_property -dict { PACKAGE_PIN N19 IOSTANDARD LVCMOS33 } [get_ports {RGB[11]}];    #R3
set_property -dict { PACKAGE_PIN J19 IOSTANDARD LVCMOS33 } [get_ports {RGB[10]}];    #R2
set_property -dict { PACKAGE_PIN H19 IOSTANDARD LVCMOS33 } [get_ports {RGB[9]}];     #R1
set_property -dict { PACKAGE_PIN G19 IOSTANDARD LVCMOS33 } [get_ports {RGB[8]}];     #R0
set_property -dict { PACKAGE_PIN D17 IOSTANDARD LVCMOS33 } [get_ports {RGB[7]}];     #G3
set_property -dict { PACKAGE_PIN G17 IOSTANDARD LVCMOS33 } [get_ports {RGB[6]}];     #G2
set_property -dict { PACKAGE_PIN H17 IOSTANDARD LVCMOS33 } [get_ports {RGB[5]}];     #G1
set_property -dict { PACKAGE_PIN J17 IOSTANDARD LVCMOS33 } [get_ports {RGB[4]}];     #G0
set_property -dict { PACKAGE_PIN J18 IOSTANDARD LVCMOS33 } [get_ports {RGB[3]}];     #B3
set_property -dict { PACKAGE_PIN K18 IOSTANDARD LVCMOS33 } [get_ports {RGB[2]}];     #B2
set_property -dict { PACKAGE_PIN L18 IOSTANDARD LVCMOS33 } [get_ports {RGB[1]}];     #B1
set_property -dict { PACKAGE_PIN N18 IOSTANDARD LVCMOS33 } [get_ports {RGB[0]}];     #B0